About Nachi
Products
menu 3
International
Contact Nachi
menu 5
Nachi home  

Nachi Home

Angular Contact Ball Bearings


Single/Duplex Mounting
Single
Back-to-back (DB)
Face-to-face (DF)
Tandem (DT)
Double-Row
Open
One Shield
Two Shields
One Contact Seal
Two Contact Seals
Snap Ring Groove
Snap Ring

 

Select Bearings Menu

Single-row Angular Contact Ball Bearings
The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep- groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition.

Double-row Angular Contact Ball Bearings
The construction of this type ball bearing is similar to the adjacent, BACK-TO- BACK mounting of two Single-row Angular Contact ball bearings. Because fewer balls can be inserted per row compared to Single-row Angular Contact ball bearings, a Double-row Angular Contact ball bearing will have less load capacity than an equivalent size/series BACK-TO-BACK set of two Single-row Angular Contact ball bearings. This bearing type can sustain radial, moment and bi-directional axial loads.

 

 
Home | Bearings | Contact | Legal

NACHI (AUSTRALIA) PTY. LTD.