About Nachi
Products
menu 3
International
Contact Nachi
menu 5
Nachi home  

Nachi Home

Thrust Ball Bearings

Single Direction
Flat Back-face
Spherical Back-face
With Aligning Seat
2900 Series
3900 Series
Inch Series
Double Direction
Flat back-face
Spherical Back-face
With Aligning Seat

 

Select Bearings Menu

Thrust Ball Bearings
Thrust ball bearings can handle axial loads only. Bearing rings mounted on the shaft are called shaft washers, and those mounted in the bearing housing are called housing washers.

Both washers contain grooves for the balls. Thrust Ball bearings are of two types: single type which can support axial loads in only one direction and double type that can support bi-directional loads.

The central washer of double type thrust ball bearing is located in an axial direction by a shaft shoulder and sleeve. Thrust Ball bearings are not suitable for high-speed rotation since lubri~ant is expelled by centrifugal force.

When used on a horizontal shaft, a minimum axial load must be applied. Pressed steel plate, polyamide resin, machined high-strength brass or mild steel are used for cages. Care must be taken in handling to prevent damage to the separable rings and ball assembly.

 

 
Home | Bearings | Contact | Legal

NACHI (AUSTRALIA) PTY. LTD.